TSI  PE Ice Cooler Box by Rotational Molding
Available in Model and Size:
Model                          Size
TSI-40L                        40 Liter
TSI-50L                        50 Liter
TSI-75L                        75 Liter
TSI-75LW                    75 Liter
TSI-90L                        90 Liter
TSI-95LW                    90 Liter

TSI-15LIPU                  15 Liter (Injection Molding and Box & Lid PU Foamed)

TSI SKY BLUE ESKY ICE COOLER

TSI SKY BLUE ESKY ICE COOLER

NOTE: TSI-75LW, TSI-95LW are fitted with wheels
New! TSI 27L Liter is scheduled to be in production and available from 30th November 2022

Outer Box and Lid Quality PE UV treated (polyethylene), insulated with Quality PU Foam
Fitted Quality Elastomer Latch attached with stainless steel pins
Molded in hole insert to allow for Security Locks, 1 at each end of the Box
Hinge fitting Lid to the Box with stainless steel pin
Fitted with 2 x stainless steel bottle openers
Rope Handles
Quality drip/leak free Drain Plug
Feet Rubber Non-Slip
Elastomer Rubber Latches and PVC Handle on the Rope Handle, available in Black, Fluro Orange, Fluro Green.  (Especially handy for identification if using more that 1 Ice Cooler Box and having different product in multiple Ice Cooler Box, easy to locate when camping out overnight)
Ruler Measurement molded in to the Lid.
Lid has 2 x cup/can/bottle inserts molded in
Silicone Seal between Lid and box to ensure firm seal when box is closed in Latched position

TSI burgundy ESKY ICE COOLER

TSI 90 LITRE COOLER

TS Ice cooler 15 litre

Manufactured 15 Liter Ice Cooler For Maximum Performance
TheIce Cooler uses such well-designed insulation PU Foam in this product it will retain cold and heat.
Material: PP copolymer
Insulation: PU Foam (fully insulated Box and Lid)
Capacity: 15 Liter
Dimension O/D: 405mm x 285mm x 290mm
Weight:4.0 KG
Locking: fitted with Stainless Steel Latch, non-rusting and firmly lock.
Colors: White, Blue, Silver other colors on request from the customer, requires minimum order 200 pieces per color.

• Note: This particular 15 Liter Plastic injected Ice Cooler is insulated comparable as to most Roto Molded PE Coolers, such as Dometic, Tropical, Palm, Outback, Yeti, Rhino, Himalaya etc., and serviceable in Ice retention times as those Roto Molded PE Coolers, mentioned above.We do not know of any other Injected or Blow Molded coolers that are of such Quality, most Injected or Blow Molded coolers in the market, have no insulation or only insulated with thin cut sheets of Polystyrene.
• Ex-factory pricing US$19.00 per piece. 

Prepping Your PE ice Cooler For Maximum Performance

Because your PE ice Cooler uses such well-designed insulation in this product it will retain cold and heat.
When prepping the cooler for optimal cold performance make sure the cooler is not hot. If you load the cooler after it has been stored in a warm environment and is not cooled before use, you will not realize the coolers full potential. Try to begin with, and keep, the cooler out of direct sun.


Next lower the inside temperature of the cooler by adding a sacrificial bag of ice several hours before actually packing the cooler for use, if possible, put it in a chest or walk-in freezer for the same amount of time. This will create a refrigerated mass inside the cooler. By pre-cooling you will eliminate the heat stored inside the walls and lid of the cooler enabling the cooler to begin at the same temperature as the ice you are about to add and allowing the PE Cooler to perform and insulate the way it was intended.
Now empty the water and add cubed ice to the entire bottom area of the cooler. Use as much cubed ice as possible.  Food, drink and other goods can now be put into the cooler. It is best to refrigerate or freeze the items before adding them to the cooler. Leave enough space around the edge and top to add a substantial amount of cube ice and fill all remaining air pockets. Air pockets speed up the melting of the ice. Once full and allowing room to close the lid, do so promptly. During use only open the lid for short periods of time and as little as possible. This will greatly increase the life of the ice, in turn maintaining the quality and safety of foods and drinks as long as you can.


Depending on the size of the cooler and the steps that are followed to obtain maximum ice retention, results will vary. In most cases the Pe Ice Cooler will have 5% of ice remaining after seven days in temperatures of 37 degrees. 

Cleaning and Maintenance
If you take care of this PE Ice Cooler Box it can last your life time. Before using your PE Ice Cooler Box clean the interior with any standard dish washing detergent and rinse. For tough odors, wash with a 1-part bleach and 50-parts water mixture. Clean the Silicone seal regularly to maintain a good tight seal. The exterior of the box has been manufactured with a finish to allow ease of cleaning and can usually be cleaned by rinsing and wiping down with a non-abrasive cloth. If tough dirt remains use a mild dish detergent. Residue left from oils can be removed easily by using lanolin-based hand cleaner or baby oil.

Do not use alcohol-based cleaners that dry before removing the stain.


Thank you for choosing our TSI PE Ice Cooler Box. We believe that you will have years of great experiences with your new cooler. We take special care in manufacturing our coolers, and we welcome any comments or questions about the performance of our product. We are committed to customer service, and will do what it takes to exceed our customer's needs.

 

COSTS & MIN ORDER 20FT CONTAINER

Model

Liter

Length

Width

Height

Weight

Unit/price

A$ approx

ex-factory thai baht

TSI 40L

40 Liter

520 mm

435 mm

505 mm

11.5 KG

1,800

A$74.95

TSI 50L

50 Liter

640 mm

440 mm

500 mm

12 KG

1,980

A$82.40

TSI 75L

75 Liter

760 mm

485 mm

500 mm

15.5 KG

2,285

A$95.50

TSI 75LW

75 Liter W

760 mm

565 mm

515 mm

17.5 KG

2,700

A$112.00

TSI 90L

90 Liter

810 mm

510 mm

500 mm

16.8 KG

2,555

A$106.50

TSI 90LW

90 Liter W

810 mm

590 mm

515 mm

18.8 KG

2,955

A$122.95

TSI 15L inj

15 Liter

405 mm

285 mm

290 mm

4.75 KG

665

A$28.00

* Note: Dimensions are Overall Outside Dimensions